Bionaire BAP4010 Bedienungsanleitung PDF herunterladen (Seite 2)

OPERATING INSTRUCTIONS

1. Carefully unpack your air cleaner. Select a firm level

place where there are no obstructions to the air inlet

(side grills) or filtered air outlet (top grills).

2. Plug into a 120V AC electrical outlet. The air cleaner

will beep twice signaling that it is ready for use.

3. Press the Power Button ( ) once. The air cleaner will

be turned onto HIGH fan speed.

4. Press the Speed Button ( ) to select the desired air

cleaning setting. Press once to select MEDIUM fan

speed, or twice to select LOW fan speed, or a third

time to return to HIGH fan speed.

5. To activate the ionizer function, press the Ionizer

Button ( ) once. The Ionizer Indicator ( ) will illuminate

on the Display Screen. To deactivate the ionizer, press

the Ionizer Button ( ) again.

6. For optimum air filtration, it is recommended to operate

the air cleaner continuously. Its rugged motor has been

designed to give many years of use. For continuous

use, it’s recommended to operate the air cleaner at the

MEDIUM fan speed. For quieter operation or use in a

bedroom, select the LOW fan speed. When high levels

of air pollution are present, select the HIGH fan speed

to quickly circulate and filter air in the room.

SETTING THE TIMER

Your PERMAtech™ air cleaner is equipped with an 8-

Hour Timer that will automatically turn the power off after

the desired amount of time has been reached.

1. Press the Timer Button ( ) to set the number of

hours the air cleaner will operate, and then automatically

turn off.

2. The timer can be set for 1 to 8 hours by pressing the

Timer Button ( ) and increasing the time in increments

of 1 hour.

3. The Timer Indicator ( ) and number of hours selected

will flash a few times, then remain illuminated on the

Display Screen.

4. When the timer has elapsed, the air cleaner will beep

3 times and turn off.

5. To cancel the timer operation press the Timer Button

( ) until the Timer Indicator ( ) on the Display

Screen is no longer illuminated or turn the power off

by pressing the Power Button ( ) on the Control

Panel. Another way to cancel the Timer feature is to

press and hold the Timer Button ( ) for 3 seconds

until the Timer Symbol ( ) is turned off.

AIR CLEANER SAFETY

PLEASE READ AND SAVE

THESE IMPORTANT SAFETY

INSTRUCTIONS

IMPORTANT SAFEGUARDS

When using electrical appliances, basic safety precau-

tions should always be followed to reduce the risk of fire,

electric shock, and injury to persons, including the follow-

ing:

• Read all instructions before using the appliance.

•To avoid fire or shock hazard, plug the appliance

directly into a 120V AC electrical outlet.

• If the filter is covered by a bag when shipped: Remove

plastic bag before use.

• Keep the cord out of heavy traffic areas. To avoid fire

hazard, NEVER put the cord under rugs, near heat

registers, radiators, stoves, or heaters.

•To protect against electrical hazards, DO NOT

immerse in water or other liquids. Do not use near

water.

• Close supervision is necessary when any appliance is

used by or near children, or disabled persons.

•Always unplug the air cleaner before moving it, open-

ing the grill, changing the filters, cleaning, or whenever

the air cleaner is not in use. Be sure to pull by the plug

and not the cord.

• NEVER drop or insert any object into any openings.

•DO NOT operate any appliance with a damaged cord

or plug, if motor fan fails to rotate, after the appliance

malfunctions, or if it has been dropped or damaged in

any manner. Return appliance to manufacturer for

examination, electrical or mechanical adjustment, or

repair.

• Use appliance only for intended household use as

described in this manual. Any other use not recom-

mended by the manufacturer may cause fire, electric

shock, or injury to persons. The use of attachments

not recommended or sold by JCS/THG, LLC may

cause hazards.

• DO NOT use outdoors.

•NEVER block the air openings, grills/outlets or place

on a soft surface such as a bed or sofa, as this could

cause the unit to tip over, blocking the Air Intake

Opening/Grill.

• Keep unit away from heated surfaces and open

flames.

•DO NOT attempt to repair or adjust any electrical or

mechanical functions on this unit. Doing so will void

your warranty. The inside of the unit contains no user

serviceable parts. All servicing should be performed by

qualified personnel only.

• WARNING: To reduce the risk of fire or electric shock,

DO NOT use this air cleaner with any solid-state speed

control device.

• DO NOT place anything on top of unit.

PLEASE READ AND SAVE

THESE IMPORTANT SAFETY

INSTRUCTIONS

CONSUMER SAFETY INFORMATION

CAUTION: THIS PRODUCT IS

EQUIPPED WITH A POLARIZED

PLUG (a plug having one blade

wider than the other). This plug

will fit into the power outlet only

one way. If the plug does not fit

fully into the outlet, reverse the plug. If it still does not fit,

contact qualified personnel to install the proper outlet.

DO NOT DEFEAT THE SAFETY PURPOSE OF THIS

POLARIZED PLUG IN ANY WAY.

CORD AND PLUG INSTALLATION SAFETY

INSTRUCTIONS

The length of cord used on this appliance was selected to

reduce the hazards of becoming tangled in, or tripping

over a longer cord. If a longer cord is necessary, an

approved extension cord may be used. The electrical rat-

ing of the extension cord must be equal to or greater than

the rating of the air cleaner. Care must be taken to

arrange the extension cord so that it will not drape over

the countertop or tabletop where it can be pulled on by

children or accidentally tripped over.

Thank you for choosing a Bionaire

air cleaner. To

ensure the best performance from your air cleaner,

please read and save the following instructions.

IONIZER

Your air cleaner has an optional ionizer feature, which,

when turned on, releases negative ions into outgoing

filtered air. Ions are tiny particles that carry a positive or

negative charge. These ions exist naturally around us, in

the air, water, and ground. Both positive and negative

ions are colorless, odorless, and completely harmless.

Negative ions help the air purification process by attaching

themselves to very small airborne particles in the room.

These particles take on a negative charge and may join

with positively charged particles such as dust, pollen,

smoke, and pet dander to form larger particles that are

then more readily captured by the filter system, or may

be attracted to positively charged surfaces throughout

the home, like walls or floors. This may occur more

frequently when the filter is nearing the end of its functional

life expectancy and is able to capture less of the charged

particles.

You may also note after extended use, that dust has

collected around the grills or front panel. This is from the

ionization affect caused by the negative ions exiting from

the air outlet. This is additional evidence of the air cleaning

effectiveness of negative ions. The dust can be easily

removed with a clean, damp cloth or soft brush.

Finally, using your ionizer may result in an occasional

popping or cracking sound. This is a normal sound,

generally caused by a small build-up of ions that, when

discharged, cause the popping or cracking sound.

NOTE: It is important to clean the HEPA-type filter at the

recommended intervals.

Using the ionizer in conjunction with dirty filters may result

in dirty particles exiting the air purifier and being attracted

to walls, carpets, furniture, or other household objects.

These dirty particles may prove very difficult to remove.

Homes with excessive amounts of pet dander, dust, or

smoke may decrease the life expectancy of the HEPA-type

filtration system and may interfere with the ionization

process. You may want to run the Ionizer less often and

check the condition of the HEPA-type filter(s) more frequently

in order to reduce particles from being attracted to surfaces

throughout your home as mentioned above.

PERMATECH™ FILTER CLEANING INSTRUCTIONS

1. Every few weeks, check the condition of the filter.

2. After approximately 3 months of operation a Filter

Clean indicator ( ) will be shown on the Display

Screen notifying you that the filter should be cleaned

prior to further use.

3. Turn off and unplug the air cleaner.

4. Lay the unit down on its side.

5. To remove the

PERMAtech™ filter,

press the movable filter

tab against the stationary

filter tab on the underside

of the housing to release

the filter, and slide it

out of the air cleaner.

(See Fig. 1 & 2)

6. To clean the

PERMAtech™ filter use

a brush attachment

with your vacuum

cleaner. Run the

attachment along the

inlet and outlet side of

the filter trying to clean

between the pleated filter

layers. (See Fig. 3)

Do not use water or

any other household

cleaners of detergents

to clean the

PERMAtech™ filter.

NOTE: Vacuuming

will restore perform-

ance of the

PERMAtech™ filter,

however, the filter

may appear stained.

This is normal and

does not affect the

performance in any

way.

7. To reinstall the

PERMAtech™ filter,

slide it back into the

underside of the housing,

with the movable tab facing the bottom rear of the air

cleaner. The filter will lock into place once inserted

completely within the housing.

Fig.1

Fig. 2

Fig. 3

KNOW YOUR AIR CLEANER

A. Display Screen

a. Timer Indicator ( )

b. Ionizer Indicator ( )

c. Fan Speed Indicator ( )

d. Filter Clean Indicator ( )

B. Control Panel

a. Power Button ( )

b. Speed Button ( )

c. Ionizer Button ( )

d. Timer Button ( )

C. Filter Slot

a. PERMAtech™ Filter

b. Filter Tabs

D. Base

E. Power Cord (Not Shown)

F. Air Intake Grills

G. Filtered Air Outlet

BAP401006EM1.qxd 3/10/06 1:38 PM Page 2

1 2

Kommentare zu diesen Handbüchern

Keine Kommentare

Bionaire BAP4010 Bedienungsanleitung Seite 2

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Luftreiniger Bionaire BAP4010