Bionaire BT440RC-U Bedienungshandbuch PDF herunterladen (Seite 2)

PLEASE READ AND SAVE THESE

IMPORTANT SAFETY INSTRUCTIONS

F E AT U R E S - O P E R AT I O N S F E AT U R E S - O P E R AT I O N S

When using electrical appliances, basic safety precautions

should always be taken including the following:

1. Read all instructions before using this appliance.

2. Use fan only for purposes described in the instruction

manual.

3. To protect against electrical shock do not immerse unit,

plug or cord in water or spray with liquids and plug the

appliance directly into a 120V AC electrical outlet.

4. Close supervision is necessary when any appliance is

used by or near children.

5. Unplug from outlet when not in use, when moving

fan from one location to another, before putting on

or taking off parts and before cleaning.

6. Avoid contact with moving parts.

7. Do not operate in the presence of explosive and/or

flammable fumes.

8. To avoid fire hazard, NEVER place the cord under

rugs or any parts near an open flame, cooking or

other heating appliance.

9. Do not operate any appliance with a damaged cord

or plug after the appliance malfunctions, or has been

dropped/damaged in any manner. Discard fan or

return to an authorized service facility for

examination and/or repair.

10. Do not run cord under carpeting. Do not cover cord

with throw rugs, runner, or similar coverings. Do not

route cord under furniture or appliances. Arrange

cord away from traffic area and where it will not be

tripped over.

11. The use of attachments not recommended or sold by

the appliance manufacturer may cause hazards.

12. Do not let the cord hang over the edge of a table,

counter or come in contact with hot surfaces or leave

exposed to high traffic areas.

13. Do not use outdoors.

14. To disconnect, grip plug and pull from wall outlet.

Never yank on cord.

15. Always use on a dry, level surface.

16. Do not operate fan until fully assembled with all

parts properly in place.

17. This product is intended for household use ONLY and

not for commercial or industrial applications.

18. WARNING: To reduce the risk of electrical shock

and injury to persons, do not use in window.

19. WARNING: To reduce the risk of fire or electric

shock, do not use this fan with any solid-state speed

control device.

20. This product employs overload protection (fuse). A

blown fuse indicates an overload or short-circuit

situation. If the fuse blows, unplug the product from

the outlet. Replace the fuse as per the user servicing

instructions (follow product marking for proper fuse

rating) and check the product. If the replacement fuse

blows, a short circuit may be present and the product

should be discarded or returned to an authorized

service facility for examination and/or repair.

PLEASE READ AND SAVE

THESE IMPORTANT

SAFETY INSTRUCTIONS

INSTALLATION INSTRUCTION: (SEE FIGURE 1)

ASSEMBLY INSTRUCTIONS: (SEE FIGURE 2)

Estimated assembly time: 5-10 minutes

(tools required: Screwdriver)

NOTE: MAKE SURE YOU REMOVE ALL CONTENTS FROM

THE PACKAGE. PLEASE CHECK PACKAGING MATERIALS FOR

PARTS THAT COULD BE REQUIRED TO OPERATE YOUR FAN.

1. Assemble base halves around power cord. To secure the

base halves together, slide the posts of one base half

into the slots of the second base half. Refer to Figure 2.

2. Line up the screws holes of the base halves with the

holes located on the bottom of the fan housing.

Secure with the four screws included with the

product. Refer to Figure 2.

3. Turn fan right side up and place on a dry and level surface.

OPERATING INSTRUCTIONS: (SEE FIGURE 3)

1. To control the power of the fan press the power/

speed button ( ) located on the control panel

or remote control.

2. To cycle through high, medium, and low speed

settings (3-2-1) press the power/speed button

( ) located on the control panel or remote

control.

3. To turn the oscillation on and off, press the oscillation

button ( ) located on the control panel or

remote control.

4. To set your fan to automatically shut off press the

timer button ( ) located on the control panel or the

remote control. When set, the fan will run and

automatically shut off after the set duration of time

(1, 2, 4, or 8 hours) has expired.

5. To activate the breeze mode, press the breeze button ( )

located on the control panel or remote control. When

turned on, the fan will randomly cycle through the three

speeds settings recreating a natural outdoor breeze.

6. To turn the fan off press and hold the power/speed button

( ) located on the control panel or remote control.

NOTE: your fan features a LED display panel. When a specific

feature is activated on your fan, the LED display panel

will light up showing which features have been activated.

REMOTE CONTROL HANDSET: (SEE FIGURE 3)

NOTE: PLEASE REMOVE THE PROTECTIVE STICKER FROM

THE REMOTE CONTROL BATTERY BEFORE OPERATION.

This unit includes one lithium battery, CR2025/3V.

Remove battery before discarding the remote.

Battery Replacement

a) Locate the battery compartment on the back of the

remote control handset. Slide the battery cover out

with your thumb.

b) Remove old battery.

c) Place new battery into battery compartment.

d) Slide battery compartment into the remote control

handset.

NOTES:

• Remove the battery from the equipment when it is not

being used for an extended period of time.

• Remove the used battery promptly.

• Do not discard used batteries into household trash

containers. Contact your local government for disposal

or recycling practices in your area.

FCC STATEMENT

Potential for Radio/Television interference

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) this device must accept any interference received,

including interference that may cause undesired operation.

This product has been tested and found to comply with

the limits for a Class B digital device, pursuant to part 15

of the FCC rules.

These limits are designed to provide reasonable

protection against harmful interference in a residential

installation. The product generates, uses, and can radiate

radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful

interference to radio communications. However, there is

no guarantee that the interference will not occur in a

particular installation. If the product does cause harmful

interference to radio or television reception, which can be

determined by turning the product on or off, the user is

encouraged to try to correct the interference by one or

more of the following measures:

THIS APPLIANCE HAS A POLARIZED PLUG (one blade is wider than the

other). To reduce the risk of electric shock, this plug is intended to fit in

a polarized outlet only one way. If the plug does not fit fully in the

outlet, reverse the plug. If it still does not fit, contact a qualified

electrician to install the proper outlet.

DO NOT ATTEMPT TO MODIFY THIS PLUG OR DEFEAT THIS

SAFETY FEATURE IN ANY WAY.

A. Control Panel

B. Remote Control Storage

C. Fan Housing

D. Base Halves

E. Remote Control

Figure 1

Figure 2

A. Oscillation Button B. Breeze Button C. Power/Speed Button D. LED Display Panel E. Timer Button

Figure 3

Control Panel

Remote Control

1 2

TOWER FAN 1
FCC STATEMENT 2

Kommentare zu diesen Handbüchern

Keine Kommentare

Bionaire BT440RC-U Bedienungshandbuch Seite 2

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Haushaltsfans Bionaire BT440RC-U